In Sam's toy car, each lamp is joined to the battery by only one wire. The other end of the battery and the other side of each lamp are both joined to the car's steel body. The battery and the lamps work, and the lamps light.
- Explain how there can be a closed circuit when each lamp has only one wire to the battery. [1]
- Sam fixes another working lamp onto the car's plastic roof. It has one wire to the battery, and its other side touches only the plastic. Explain why this lamp does not light. [1]
- Suggest how Sam could make the roof lamp light without changing the roof. [1]
Need a hint?
(a) Which part of the car could do the job of a second wire?
Model answer
- (a) Current needs a complete loop from the battery and back.
- The steel body conducts and is joined to the battery, so it completes each lamp's loop.
- (b) Plastic does not conduct, so the roof lamp has no path back.
- (c) A wire from the lamp to the steel body closes its circuit.
(a) The steel body is a conductor and is joined to the other end of the battery, so the current flows from the battery along the wire, through the lamp, then through the steel body back to the battery, making a closed loop.
(b) Plastic is an electrical insulator, so there is no path from the roof lamp back to the battery; the circuit is open.
(c) Join a wire from the other side of the roof lamp to the steel body (or back to the battery).
How the 3 marks are given
- (a) States that the steel body is a conductor that carries the current back to the battery, completing the loop.
- (b) States that plastic is an insulator, so there is no path back to the battery / the circuit is open.
- (c) Suggests a wire from the lamp's other side to the steel body or to the battery.
One mark for each point. Keywords count: an everyday word in place of the science word can lose the mark.
The mistake this question tests
Stopped before the full cause and effect
For (a), the steel body works as the second wire: it is a conductor joined to the battery, so the loop is closed through it. For (b), "the wire is too short" misses the point: the lamp's other side touches only plastic, an insulator, so there is no path back and the circuit is open.
More PSLE Science electrical systems questions
The number display above a hawker stall uses seven light bars for each digit
See the answer →MCQ · 2mA door alarm uses a switch made of two thin, springy strips sealed in a glass tube, with a small gap between…
See the answer →Open-ended · 3mJia is building a bedside light with one battery, one switch, S, and three identical bulbs
See the answer →MCQ · 2mPlastic is used for:
See the answer →Open-ended · 3mWen pushed a copper strip and a zinc strip into each of three lemons
See the answer →MCQ · 2mHana's torch takes one cell
See the answer →Practise PSLE Science until the mistakes stop.
Three PSLE questions, free, no sign-up. You’ll see exactly where the marks went. Then 7 days of everything for S$4.99.